1ª 10155 ES 9 - 2009
34
1:
Flash board.
J2:
not used
J3:
connection to the
Rack
. Corresponds to
the data bus and addresses.
J4:
UART 1 for re-programming of the
memory flash.
J5:
UART 2 port of communication.
J6:
connection protocol EXECUTIVE.
J7:
connection protocol MDB.
The saving of programmes can be done in three different ways:
15.5.1 Updating the
control board
of the machine from a PC
The following items are needed:
¾
PC with Windows 95 or above. The connection is made with the serial port, so the PC
must have one.
¾
Programme:
LOADER
version 2.5 installed on the PC.
¾
Files with the programmes, extension
.S19
installed in the PC.
¾
Connection cable between the serial port of the PC and the
control board
of the
machine to the connector UAR1.
Summary of Contents for STEP 41
Page 28: ...1 10155 ES 9 2009 28 Below are the technical characteristics...
Page 29: ...1 10155 ES 9 2009 29...
Page 57: ...1 10155 ES 9 2009 57...
Page 58: ......
