Azkoyen STEP 41, Technical Information

Page: 21 / 58

1ª 10155 ES 9 - 2009
21
Disconnect the terminal on the motor of the
extraction board.
Force the tab on the channel outwards and pull it
upwards.
11.3 Product extractor motor
The Motor extractor assembly (F1) is made up of a motor and a reducer gearbox. When the motor
receives voltage, the plate (F2) goes down at the same time as the rear tabs (F3) hold the column
of packets of cigarettes, against the deflector (F2) except the bottom packet that is extracted
from the machine.
F1 Extractor motor
F2 Product deflector
F3 Channel wall
F4 Deflector in position A
F5 Deflector in position B