Azbil SLPC1F, User Manual

Page: 17 / 86

2-5
Chapter 2. Installing, Starting, and Exiting the Loader
2 - 2 Installing the Device Driver for the USB Loader Cable
A device driver must be installed before using the USB loader cable.
Follow the procedure below to install the device driver.
„ Installing the USB loader cable device driver
If this is the first time the USB loader cable has been used on your computer, it is necessary to install the driver.
If an old driver is installed, uninstall it first.
z How to check the version of the USB loader cable
The version is shown on the sticker attached to the USB loader cable.
REV.05 to 06 Driver installation is required.
If an old driver is installed, uninstall it first.
No “REV” number Not supported.
Use a Rev. 05 or higher version of the USB loader cable.
z Checking the driver
(1) Plug the USB loader cable into a USB port.
(2) Open the Device Manager.
To open it, right-click the [Start] button and click [Device Manager] .
(3) Check the version.
Open the properties of “Yamatake USB Loader Comm. Port (COMx)” in “Port
(COM and LPT)" in the Device Manager, and go to the Driver tab to check the
driver version.
Versions 0.x.x.x to 4.x.x.x are old drivers.