background image

AB-6387

5

(2/2)

Item

Specification

Operating conditions

Rated operating conditions

Ambient 

temperature

-20–60 °C

Ambient 

humidity

5–95 % RH

Transport and storage 

conditions

(in packed state)

Ambient 

temperature

-20–70 °C

Ambient 

humidity

5–95 % RH

Installation Location

Indoor use

Note: Salt air, corrosive gas, flammable gas, and organic solvent must be avoided.

Outdoor use

Note: Salt air, corrosive gas, flammable gas, and organic solvent must be avoided. 

And, use the outdoor cover (optional parts) etc. to avoid direct sunlight.

Mounting position

Refer to ■ "Installation," ● "Mounting position."

Manual operation

Available

Refer to ■ "Installation," ● "Manual open/close operation."

Insulation resistance Between terminals and case

5 MΩ or more at 500 V DC

Withstand voltage

Between terminals and case

Model MY3000F0200

Model MY3000F0400

Model MY3000E0200

Model MY3000G0200

Model MY3000V0200

Model MY3000D0200

500 V AC for 1 min

Model MY3000G9200

1500 V AC for 1 min

Weight

Approx. 3 kg

Accessories*

Hexagon bolt M6x25  (for Model Q605 damper linkage)

*  The bolt was not packed with the product since the shipment in March 2018  (date code: 1812 or later) .

Summary of Contents for MY3000 00 Series

















Reviews: