(3) Remove the terminal cover.
(4) Put the packing on the supplied waterproof gland.
(5) Pass the cable through the waterproof gland, and mount the waterproof gland
in the wiring port.
Handling precautions
•
Never remove the packing from the waterproof gland.
•
Use a cable that is 6 to 12 mm in diameter.
(6) Connect the wiring to the terminal block.
(7) Put the terminal cover back in place.
●
Procedure for using an electrical wiring conduit
The wiring port thread is G1/2.
(1) Specify the wiring port.
Handling precautions
•
There are 2 wiring ports. One has a red cap and the other has a plug.
Decide whether to use 1 port or 2 ports depending on the number of
cables or desired separation of signal wires.
(2) Remove the red cap from the wiring port.
13
Chapter 3. INSTALLATION, MOUNTING, WIRING
