■
Wiring
CAUTION
When connecting the load to the output terminals, do not exceed the rated value shown in the
specifications.
Doing to do so might cause the damage of this device.
Before wiring, be sure to turn the power OFF.
Before supplying power, be sure to check that there is no wiring error.
A wiring error might damage the device or cause a dangerous condition.
Handling precautions
•
Be sure to separate the communications wires from power lines, which should
not be laid in the same electrical conduit.
There are two wiring methods, direct cable lead-out and use of an electrical wiring
conduit.
When installing the device outdoors, be sure to use a conduit.
●
Tools required
Phillips-head screwdriver, adjustable wrench (spanner)
●
Procedure for direct cable lead-out
(1) Specify the wiring port.
Handling precautions
•
There are 2 wiring ports. One has a red cap and the other has a plug.
Decide whether to use 1 port or 2 ports depending on the number of
cables or desired separation of signal wires.
Red cap
Plug
(2) Remove the red cap from the wiring port. When leading out the wiring from
two ports, remove the plug also.
12
Chapter 3. INSTALLATION, MOUNTING, WIRING
