Azbil MCF Series, User Manual

Page: 32 / 58

24
Chapter 5. SETTING AND OPERATION
Func Name Settings Factory Description
No. setting
C06 Alarm event 00: Alarm event (general) 00 An alarm event can be output from terminal
01: AL59 battery alarm AL. If 00 is selected, the output is the same as
02: AL40 over range when 14 is selected in C03 . The “AL“ LED
does not depend on the alarm event selected.
It lights up regardless of the kind of alarm.
C07
Event standby 00: Disabled 00 If 02 or 05 is selected in
C03
, the event
01: Enabled standby will operate until the instantaneous
flow rate event setting is exceeded once after
power is turned on.
C08 Gas type 00: Air, nitrogen (fixed) 00
C 10
Operating 00: [No correction] 00 If the operating pressure is high, this function
pressure 01: [Direction 2] 0.5 MPa min. is used to correct the pressure dependence
(correction for 02: [Direction 3] 0.5 MPa min. due to pipe direction. For [Position 1] or
pipe direction) [Position 4], select [00: No correction]
regardless of the operating pressure. For
[Position 2] or [Position 3], select [00: No
correction] if the operating pressure is less
than 0.5 MPa.
C 1 1
Reference 00 to 35
°
C (every 1
°
C) 00 If the setting is changed, the peak value and
temperature the lowest value are reset.
*1: If you change the flow rate engineering unit, affix the appropriate unit label (included with the MCF) on top of the
current label.
*2: Minimum unit
MCF0080/0150/0151/0250: 10 L/pulse (0.01 m
3
/pulse, 0.01 kg/pulse)
MCF0400/0500: 100 L/pulse (0.1 m
3
/pulse, 0.1 kg/pulse)