AB-7163
9
Parts Identification
Figure 5. Parts identification
Table 1. Indication and operation of operating status LED
LED indication
LED operation
Data transmitting
Expansion bus TX LED: flashing
Data receiving
Expansion bus RX LED: flashing
Major failure / system restart
ERR1: ON
Minor failure / system restart
ERR2: ON
Connection of Data Setter (H-MMI) / PC-MMI
Connection of Data Setter Model QY5111B:
No conversion cable is required. Directly insert the male connector of the Data Setter into the female connector provided on the
Infilex BC I/O control unit.
At this time, hold the male connector with the
◄
mark facing left and insert it as the mark points to the
►
mark on the
Infilex BC I/O control unit.
Connection of Data Setter Model QY7211B / PC-MMI:
Convert the D-SUB connector to the mini DIN connector with the conversion cable (Part No. 83104995-001).
At this time, hold the male connector with the
◄
mark facing left and insert it as the mark points to the
►
mark on the
Infilex BC I/O control unit.
Figure 6. Connecting Data Setter/PC-MMI
Insert the male connector as
the two arrows point to each
other.
DIN rail
mounting
hook
Do not press the S1 switch.
S1 switch*
Connector (female)
for Data Setter
Power switch
LED for
Power ON/OFF
Battery holder
LED for
operating status
