AB-7163
Our controller Infilex series: Infilex is named for “Infinity” and “Flexible”.
1
Specifications/Instructions
Infilex
™
BC
Multipurpose Controller
I/O Control Unit
General
Infilex BC (Infilex: named for “Infinity” and “Flexible”) Model
WY5610 is a multipurpose controller designed to control
building equipment, such as air handling unit (AHU).
Infilex BC enables to control the temperature and humidity,
as well as building equipment operations.
Infilex BC consists of the control unit, the I/O control unit, and
I/O modules. The number and types of the I/O modules can
be changed corresponding to the control or management to
fit various applications. Additionally, since the software to be
installed can be freely edited, an optimum application for
building equipment is configured in terms of both the
software and hardware.
Infilex BC communicates with our
savic-net™ FX
BMS
(Building Management System) through BACnet®/IP
network. By sending the operation status to the BMS center
unit or by controlling the operations based on the commands
sent from the BMS center unit, the integrated control of the
entire building can be performed.
Features
●
BACnet® controller:
Infilex BC is integrated in the BACnet/IP network.
●
Compact
design:
Small size body allows free installation in a desired
place.
●
I/O module configurations:
Input and output types are selectable, and the number of
points to mount can be increased or decreased
corresponding to your application.
●
Software
configuration:
Software is editable to fit for the contents of your
application.
●
User interface module (Operator Panel):
Operator Panel (panel mount type/integral type)
connected to Infilex BC I/O control unit allows you,
without changing the settings from the BMS center unit,
to change the Infilex BC settings.
●
Remote control with a user terminal:
Neopanel or Neoplate is connectable, so that a user in a
room (remote location) can turn ON and OFF the AHU
and change temperature setting.
●
Cooperation
with
BMS:
Infilex BC integrated into
savic-net FX
BMS enables to
centrally monitor and control building equipment from the
BMS center unit (client PC).
●
Autonomous distributed control:
Even if a trouble occurs in the BMS, the backup
operation is performed individually to distribute potential
risks caused by malfunction of the system.
●
Easy
wiring:
Screwless push-in terminals for the communication line
reduces wiring work load.
●
CE Marking certified:
Infilex BC I/O control unit Model WY5611W0000
conforms to all the applicable standards of CE Marking
(Class A).
