Ayrton Khamsin, User Manual

Page: 12 / 20

USER MANUAL _
12
w Double click to confirm
w Long click the jog wheel to back to last button press –“Display Setting”
then back to main menu by long click again
Flip Display
Allows you to rotate the display by 180°. This can be highly useful when
the fixture is installed with the head facing down.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Display
Setting”.
w Double click to access “Display Setting” menu The display will show
“Flip Display”.
w Double click to access “Flip Display” The display will show “OFF” Turn
the jog wheel to select “ON”.
w Double click to confirm
w Long click the jog wheel to exit menu –“Display Setting” then back to
main menu by long click again
Key Lock
Activates the automatic keypad lock. If this function is enabled, the keys
will be automatically locked 15 seconds after exiting edit mode. Hold the
MENU key down for 3 seconds to deactivate this function.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Display
Setting”.
w Double click to access “Display Setting” menu The display will show
“Key Lock”.
w Double click to access “Key Lock” The display will show “OFF” Turn the
jog wheel to select “ON”.
w Double click to confirm
w Long click to exit menu –“Display Setting” then back to main menu by
long click again.
DispFlash
Causes the display to flash as a warning that there is no DMX signal.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Options”.
w Double click to access “Options” turn the jog wheel to select “Display
Setting”.
w Double click to access Display Setting”menu The display will
show“DispFlash”.
w Double click to access “DispFlash” The display will show “OFF” Turn the
jog wheel to select“ON”.
w Long click to exit menu–“Display Setting” then back to main menu by
long click again.
SIGNAL SELECT
Signal Select
This menu allows you to choose which type of signal is used to control the
fixture (DMX, WDMX, Art-Net or sACN).
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Signal
Select”.
w Double click to access “Signal Select” The display will show “DMX”
w Turn the jog wheel to select “DMX” “WDMX” “Art--Net” or “sACN”.
w Double click to confirm
w Long click to exit menu –“Signal Select” then back to main menu by
long click again.
TEMP. C/F
Allows you to select the unit of measurement for the temperature values,
in either Celsius or Fahrenheit.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Options”.
w Double click to access “Options” turn the jog wheel to select
“Temperature C/ F”.
w Double click to access “Temperature C/ F” The display will show
“Fahrenheit” Turn the jog wheel to select “Celsius”.
w Double click t confirm
w Long click to exit menu –“Temperature C/ F” then back to main menu
by Long click again.
INITIAL POS.
Controls the initial position of the fixture’s effects.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Initial
Pos.”.
w Double click to access “Initial Pos.” The display will show “PAN=XXX”.
w Long click to exit menu –“Initial Pos.” then back to main menu by long
click again.
WIRELESS DMX
This menu allows you to activate, activate and resend data via XLR plug
or reset wireless pairing.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Wireless
DMX”.
w Double click to access “Wireless DMX” The display will show “Activate
WDMX” Turn the jog wheel to select “Act&Data Out” or “Rest WDMX” to
reset Wireless pairing
w Double click the jog wheel to back to last button press –“Wireless DMX”
then back to main menu by double click again.
TRIGGER
DMX Value Disp.
Allows you to view the DMX value received for each setting. The “ALL”
option will display only the setting being edited.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Options”.
w Double click to access “Options” urn the jog wheel to select “Trigger”.
w Double click to access “Trigger”menu The display will show “DMX Value
Disp”.
w Double click to access “DMX Value Disp” The display will show
“PAN=……..”.
w Double click the jog wheel to back to last button press –“Trigger” then
back to main menu by double click again.
Set To Slave
Sets the fixture to SLAVE Mode for receiving instructions from a master
luminaire (see Master/Save mode settings, below).
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Options”.
w Double click to access “Options” turn the jog wheel to select “Trigger”.
w Double click to access “Trigger”menu The display will show “Set To
Slave”.
w Double click to access “Set To Slave” The display will show “Slave1”
“Slave2” “Slave3”.
w Double click the jog wheel to back to last button press –“Trigger” then
back to main menu by double click again.