Ayrton Khamsin, User Manual

Page: 14 / 20

USER MANUAL _
14
TEST
HOME
Allows you to reset the functions. You can select these functions by
adjusting the channel.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Test”.
w Double click to access “Test” turn the jog wheel to select “Home”.
w Double click to access “Home” The display will show“All” Turn the jog
wheel to select “All” “Pan&Tilt” “Color” “Gobo” or “Other”.
w Double click the jog wheel to back to last button press –“Test” then
back to main menu by double click again.
TEST CHANNEL
Tests each of the fixture’s settings (e.g., PAN, TILT).
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Test”.
w Double click to access “Test” turn the jog wheel to select “Test Channel”.
w Double click to access “Test Channel” The display will show“Pan” Turn
the jog wheel to select other channel.
w Double click the jog wheel to back to last button press –“Test” then
back to main menu by double click again.
MANUAL CTRL.
Allows you to access all the fixture’s settings manually (e.g., PAN, TILT).
The shutter and the electronic dimmer are by default 100% open.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Test”.
w Double click to access “Test” turn the jog wheel to select “Manual
control”.
w Double click to access “Manual control” The display will show“PAN=XXX”.
w Double click the jog wheel to back to last button press –“Test” then
back to main menu by double click again.
CALIBRATION
Calibrates certain settings such as Pan, Tilt and Zoom. The password
required to access the calibration function is 050.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Test”.
w Double click to access “Test” turn the jog wheel to select “Calibration”.
w Double click to access “Calibration” The display will
show“Password=050”.
w Double click the jog wheel to back to last button press –“Test” then
back to main menu by double click again.
PRESET
SELECT PROG.
Allows you to select the program for “Program Run.”
EDIT PROG.
Allows you to edit internal programs.
EDIT SCENES
Allows you to edit scenes within the internal programs.
SCENES INPUT
The luminaire features a DMX recorder, which can receive the scenes
programmed on your DMX controller. Set the desired number of scenes
from the control panel. Then run the scenes from your controller. They will
be automatically transmitted to the GHIBLI.
MASTER/SLAVE MODE SETTINGS
A MASTER fixture can send up to 3 different sets of data to a SLAVE
fixture (e.g., a MASTER fixture can control 3 different SLAVE fixtures which
will each perform 3 different programs). The MASTER fixture sends the 3
programs in a continuous loop.
The SLAVE fixture receives data from the MASTER fixture according to the
group to which the SLAVE fixture is assigned. For example, if the SLAVE
fixture has been assigned to “Slave 1” in the menu “Set to Slave”, the
MASTER fixture sends “Auto Program Part 1” to this SLAVE fixture. If it
was assigned to “Slave 2”, the SLAVE fixture would receive the program
“Auto Program Part 2” from the MASTER fixture.
To launch a program, follow this procedure:
1. Slave Settings - SLAVE fixture adjustment
Use the buttons to select “Function Mode.”
Press ENTER to confirm.
Use the buttons to select “Set slave to.”
Press ENTER to confirm.
Use the buttons to select “Slave 1”, “Slave 2” or “Slave 3.”
Press ENTER to confirm.
Press MODE/ESC to return to the main menu.
2. Automatic Program Run
Use the buttons to select “Function Mode.”
Press ENTER to confirm.
Use the buttons to select “Auto Program.”
Press ENTER to confirm.
Use the buttons to select “Master” or “Alone.” “Master” sets the fixture
as the master.
Press ENTER to confirm.
Press MODE/ESC to return to the main menu.
3. Program selection for Auto Pro Part
Use the buttons to select “Edit program.”
Press ENTER to confirm.
Use the buttons to select “Select programs.”
Press ENTER to confirm.
Select “Auto Program Part 1”, “Auto Program Part 2” or “Auto Program
Part 3”, for the Slave program to be sent. Selecting “Part 1” will cause the
SLAVE to run the same program as the MASTER fixture.
Press ENTER to confirm.
Press MODE/ESC to return to the main menu.
4. Program selection for Edit Program
Use the buttons to select “Edit program.”
Press ENTER to confirm.
Use the buttons to select “Edit program.”
Press ENTER to confirm.
Use the buttons to select the desired program.
You can edit specific scenes in a given program.
Press ENTER to confirm.
Press MODE/ESC to return to the main menu.
5. Automatic Scene Recording
Use the buttons to select “Edit program.”
Press ENTER to confirm.
Use the buttons to select “Edit scenes.”
Use the buttons to select the number of desired scenes. (maximum