Ayrton Khamsin, User Manual

Page: 11 / 20

USER MANUAL _
11
w Double click to access to access “Pan/Tilt Spd” The display will show
“Speed 1” Turn the jog wheel to select “Speed 1” “Speed 2” “Speed 3”
or “Speed 4”.
w Long click the jog wheel to exit menu –“Status” then back to main
menu by long click again
Hibernation — Standby mode
The LEDs and the pan/tilt motors will be powered down if the luminaire
receives no DMX signal for several minutes (default setting is OFF). If the
DMX signal is restored after this time limit, the luminaire will perform a
RESET before resuming normal operation.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Status”.
w Double click to access “Status”menu The display will show “Hibernation”.
w Double click to access “Hibernation” The display will show “OFF” Turn
the jog wheel to select“01M” “02M” . . . “99M”.
w Double click to confirm
w Long click to exit menu –“Status” then back to main menu by long click
again.
Art-Net to DMX
This function allows you to output through the DMX output the DMX
universe selected.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Status”.
w Double click to access “Status” menu The display will show “Art-Net
to DMX”.
w Double click to access “Art-Net to DMX” The display will show “OFF”
Turn the jog wheel to select “ON”.
w Double click to confirm
w Long click to exit menu – “Status” then back to main menu by long
click again.
SERVICE PIN
WARNING! For normal operation the “Service pin” menu information
should not be changed. Contact your dealer for more information.
Service PIN
Allows you to enter a password to access the advanced options such as
RDM PID, Set IP, Set Device IP, Set LED BIN and Change to bin (pwd: 50).
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Service
PIN”.
w Double click to access “Service PIN” menu The display will show
“Service PIN”.
w Enter 050
RDM PID
Allows you to set the fixture’s RDM PID code.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Service
PIN”.
w Double click to access “Service PIN” menu The display will show
“Service PIN”.
w Enter 050
w Double click to access “RDM PID”
w Set the RDM PID
w Double click to confirm
w Long click to exit menu –“Service PIN” then back to main menu by Long
click again.
Set IP
Allows you to set the fixture’s IP address.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Service
PIN”.
w Double click to access “Service PIN” menu The display will show
“Service PIN”.
w Enter 050
w Double click to access “Set IP” The display will show “XXX.XXX.XXX.
XXX”.
w Set the IP address
w Double click to confirm
w Long click to exit menu –“Service PIN” then back to main menu by Long
click again.
Cross Load SW
Allows you to upload the firmware to other connect units thru DMX
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options”，turn the jog wheel to select “Service
PIN”.
w Double click to access “Service PIN” menu，The display will show
“Service PIN”.
w Enter 050
w Double click to access “Cross Load SW”
w Double click to confirm. Long click to exit menu –“Service PIN”，then
back to main menu by Long click again.
FAN CONTROL
Fans Control
Allows you to choose the fan speed on the fixture head. The options are
AUTO, STAGE, STUDIO or SILENCE.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Fans
Control”.
w Double click to access “Fans Control” menu display will show “Head
Control”.
w Double click to access to access “Head Control” The display will show
“Auto”，Turn the jog wheel to select “Stage” “Studio” or “Silence”
w Double click to confirm
w Double click the jog wheel to back to last button press –“Fans
Control”then back to main menu by double click again.
DISP.SETTING
Shut off Time
Allows the fixture’s LCD display to be turned off after a period of 2 to 59
minutes.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Display
Setting”.
w Double click to access “Display Setting ”menu. The display will show
“Shut off Time”.
w Double click to access “Shut off Time” The display will show “05m” Turn
the jog wheel to select“02~60m”.