Ayrton Khamsin, User Manual

Page: 18 / 20

USER MANUAL _
18
ERROR MESSAGES
When you turn on the KHAMSIN, it will first perform an automatic reset.
The display may show “Err channel is XX” indicating there is a problem
with one or more of the channels. “XX” represents channel 1, 2, 3, 4, 5
or 6, which contain the testing sensor for positioning. For example, the
message, “Err channel is Pan movement”, indicates an error in channel
1. If there is an error on channel 1 and channel 3 at the same time, the
following error message may appear: “Err channel is Pan movement”, “Err
channel is Tilt movement”. The system will flash twice, and the fixture will
generate a second reset. If the error message persists after more than two
resets, the channels showing errors will not work properly but the other
channels will function normally.
Please contact your authorized dealer or manufacturer for service and do
not attempt to repair the luminaire yourself.
PAN- movement Er
(PAN-yoke movement error): This message will appear after the reset
if the yoke’s magnetic-indexing circuit malfunctions (failed sensor or
magnet missing) or the stepping-motor is defective (also caused by its
driving IC on the main PCB). The PAN- movement does not return to the
default position after the reset.
TILT- movement Er
(TILT-head movement error): This message will appear after the reset
if the head’s magnetic-indexing circuit malfunctions (sensor failed or
magnet missing) or the stepping-motor is defective (also caused by its
driving IC on the main PCB). The TILT- movement does not return to the
default position after the reset.
CARE AND MAINTENANCE
The care and maintenance of your KHAMSIN should be ensured by a
qualified technician. Your KHAMSIN requires regular servicing. The
frequency depends essentially on its operating conditions and environment.
Intensive use in a dusty environment, or a lack of ventilation around the
fixture, may disrupt operation, result in overheating and cause damage
that is not covered by the warranty.
WARNING!
Disconnect from mains before servicing.
UPDATING THE LUMINAIRE
Ayrton is continually upgrading this product line. It is therefore possible
that a new software version is available that will increase the unit’s
capabilities.
Updates are performed using Ayrton’s update box. Contact your dealer for
more information.
To display the version of your device, go into the “Info” menu and select
“Software version” (see options details under the “INFO” menu). It is
advisable to use the same software version for multiple fixtures.
CLEANING
Your KHAMSIN requires cleaning at regular intervals. Be aware that
accumulated dust and residue on the air vents, body and glass of the
fixture may reduce efficiency and impair proper operation.
Before cleaning, disconnect the power cable from source.
Use compressed air to blow away dust particles accumulated on and
between the cooling fins at the rear of the luminaire’s optical system.
Clean the glass of the fixture with a slightly damp soft cloth. When
necessary, use a non-alcohol-based glass cleaner. Never use harsh
solvents!
WARNING!
Never use alcohol or any chemical agent to clean the optical system
of an Ayrton product.
COMPLIANCE CHECK
Your installation should be checked regularly by certified service center.
In addition, the following should be checked once a year by a qualified
technician:
• The fixture’s attachment system must be correctly installed and show
no sign of corrosion.
• The fixture’s mounting bracket should not be distorted in any way or
show any trace of corrosion.
• The safety cable should be attached at the appropriate spot.
• Mechanical parts should show no sign of wear.
• The electrical cables should show no sign of wear, cuts or splices.
TECHNICAL SPECIFICATIONS
OPTICAL
• High-efficiency optical system
• Opening angle of the beam: 7° to 58°
LIGHT SOURCE
• White LED module - Colour temperature output: 6,500K ± 350K
KHAMSIN-S / 5,700K ± 350K KHAMSIN-TC
• Brightness: up to 40,000 lumens (KHAMSIN-S) / 32,000 lumens
(KHAMSIN-TC)
• Estimated lifespan of LED emitters: 25,000 hours
• Guaranteed “no-flicker” effect perfectly suited for television applications
and all video recorded events
DIMMER, STROBE
• Electronic dimmer for light adjustment from 0 to 100% without color
change (16-bit)
• High-speed strobe effect in white or color at 1 to 25 flashes/second
• Pre-programmed variable strobe effects
GOBO SIZE
• GOBO size: 34mm diameter
• Image size: 24mm diameter