Ayrton COBRA ULTRA BEAM, User Manual

Page: 51 / 56

50
12. ERROR MESSAGES
When you turn on the device, it will first perform a reset.The display may show
“
Err channel is
XX ” should there be problems with one or more functions. “ XX ” stands for channel 1 ， 2 ， 3 ，
4
，
5
，
6 etc whose sensor has encountered a problem.For example
，
when the display shows
“
Err
channel is Pan movement ” ， it means there is an error on channel 1.If there are errors on channel 1 ，
channel 3
，
channel 6 at the same time
，
you may see the error message
， “
Err channel is Pan
movement
” ， “
Err channel is Tilt movement
” “
Err channel is Shutter
” ，
flash twice
，
and then the
device will generate a second reset.If the error messages persist after performing a reset more
than twice
，
the channels which have errors may not work properly however
，
all other functions
can work as usual.Please contact your dealer or manufacturer for service.Self repair is not
allowed.
PAN- movement Er
(PAN- yoke movement error) This message will appear after the reset of the fixture if the yoke’s
magnetic-indexing circuit malfunction (Optical Sensor or Magnetic Sensor fails) or the stepper
motor is defective (or its driving IC on the main PCB).The PAN-movement is not located in the
default position after the reset.
TILT- movement Er
(TILT- head movement error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions ((Optical Sensor or Magnetic Sensor fails)) or the stepper
motor is defective (or its driving IC on the main PCB).The TILT-movement is not located in the
default position after the reset.
Zoom wheel Er
(Zoomwheel error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (Optical Sensor or Magnetic Sensor fails) or the stepper
motor is defective (or its driving IC on the main PCB).The Zoom -movement is not located in the
default position after the reset.
Focus wheel Er
(Focuswheel error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (Optical Sensor or Magnetic Sensor fails) or the stepper
motor is defective (or its driving IC on the main PCB).The Focus -movement is not located in the
default position after the reset.
Color wheel Er
(Colorwheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the steppermotor is
defective (or its driving IC on the main PCB).The Color - movement is not located in the default
position after the reset.
Cyan Color wheelEr
(Cyan Color wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB).The CMY -movement is not located in the default
position after the reset.
Magenta Color wheelEr