Ayrton COBRA ULTRA BEAM, User Manual

Page: 38 / 56

37
Turn the center button to select
“
Error Record 1
” ， “
......
”
.
5. Double click the center button to confirm or long press the center button to return to the
main menu.
10.5. Test
10.5.1. Home
With this function you can reset the device via the Control Board. You can select the
different reset functions.
1 ． Double clicking center button to access main menu.
2
．
Tap the <Up/Down> button until
“
Test
”
is displayed.
3 ． Double clicking center button to access “ Test ” ， Tap the <Up/Down> button to select
“
Home
”
.
4 ． Double clicking center button to access “ Home ” ， The display will show “ All ” ， Tap
the <Up/Down> button to select
“
All
” ， “
Pan&Tilt
” ， “
Color
” ， “
Gobo
” ， “
Other
”
.
5 ． Double click the center button to confirm or long press the center button to return to the
main menu.
10.5.2.
Test Channel
With this function you can test each channel’s function to ensure correct operation.
1
．
Double clicking center button to access main menu.
2
．
Tap the <Up/Down> button until
“
Test
”
is displayed.
3 ． Double clicking center button to access “ Test ” ， Tap the <Up/Down> button to select
“
Test Channel
”
.
4 ．
Double clicking center button to access “ Test Channel ” ， The display will show “ Pan ” ，
Tap the <Up/Down> button to select other channel.
5 ．
Double click the center button to confirm or long press the center button to return to the
main menu.
10.5.3. Manual Control
When set to Manual Mode ， fixture will be back to factory settings.If want to adjust brightness ，
can adjust by shutter and dimming channel
，
channel value is 0-255.Other functions can be set
according to user's real need.
1 ． Double clicking center button to access main menu.
2
．
Tap the <Up/Down> button until
“
Test
”
is displayed.
3 ． Double clicking center button to access “ Test ” ， Tap the <Up/Down> button to select
“
Manual control
”
.
4 ． Double clicking center button to access “ Manual control ” ， The display will show
“
PAN=XXX
”
.
5 ． Double click the center button to confirm or long press the center button to return to the
main menu.
10.5.4. Calibration
With this function ， you can calibrate and adjust the effect wheels to their correct positions.The
password of calibrate values is 050.
1
．
Double clicking center button to access main menu.
2 ． Tap the <Up/Down> button until “ Test ” is displayed.
3
．
Double clicking center button to access
“
Test
” ，
Tap the <Up/Down> button to select
“
Calibration
”
.