Ayrton COBRA ULTRA BEAM, User Manual

Page: 31 / 56

30
10.3.6. Temperature C/F
With this function you can display the temperature in Celsius or Fahrenheit.
1
．
Double clicking center button to access main menu.
2 ． Tap the <Up/Down> button until “ Options ” is displayed.
3
．
Double clicking center button to access
“
Options
” ，
Tap the <Up/Down> button to select
“
Temperature C/ F
”
.
4 ． Double clicking center button to access “ Temperature C/ F ” ， The display will show
“
Celsius
” ，
Tap the <Up/Down> button to select
“
Fahrenheit
”
.
5 ． Double click the center button to confirm or long press the center button to return to the
main menu.
10.3.7. Initial Pos .
With this function you can display initial effect position.
1
．
Double clicking center button to access main menu.
2 ． Tap the <Up/Down> button until “ Options ” is displayed.
3
．
Double clicking center button to access
“
Options
” ，
Tap the <Up/Down> button to select
“ Initial Pos. ” .
4
．
Double clicking center button to access
“
Initial Pos.
” ，
The display will show
“
PAN=XXX
”
.
5
．
Double click the center button to confirm or long press the center button to return to the
main menu.
10.3.8.
Wireless DMX
From factory
，
this projector is prepared for wireless data transmission (W-DMX).If you wish
to de-activate W-DMX control
，
you can select the function
“
De-activate WDMX
”
by turning the
encoder.With the function “ rest ”， you can log out the projector from the wireless sender.
1. Double clicking center button to access main menu.
2. Tap the <Up/Down> button until
“
Options
”
is displayed.
3. Double clicking center button to access
“
Options
” ，
Tap the <Up/Down> button to select
“ Wireless DMX ” .
4. Double clicking center button to access
“
Wireless DMX
” ，
The display will show
“ Activate WDMX ” ， Tap the <Up/Down> button to select “ Act&Data Out ” ，“ Rest
WDMX
”
.
5. Double click the center button to confirm or long press the center button to return to the
main menu.
10.3.9.
Dim Curve
1. Double clicking center button to access main menu.
2. Tap the <Up/Down> button until “ Options ” is displayed.
3. Double clicking center button to access
“
Options
” ，
Tap the <Up/Down> button to select
“ Dim Curve ” .
4. Double clicking center button to access
“
Dim Curve
” ，
The display will show
“
Square
Law
” ，
Tap the <Up/Down> button to select
“
Linear
”
.
5. Double click the center button to confirm or long press the center button to return to the
main menu.
10.3.10.
Refresh Select
1. Double clicking center button to access main menu.