Assembly
14
24. Lower each filter cartridge units (14) down over the
extractor’s openings until they are firmly down, see figs 49-50.
Fig 49-50
25. Straighten the filter retaining
belts (16), position the belts
around the base of the filter and
latch them down to hold and to
seal the filters units, see figs 51-52.
Fig 51-52
26. Locate the inlet manifold (6) and the small Phillip screw (g).
Insert the manifold over the extractor’s inlet and line up the
threaded hole in the inlet with cutout slot in the manifold.
Secure the manifold in place with the Phillips screw,see fig 53-
54.
27. Finally go round and check all fixing are securely tight.
Fig 53-54
14
16
16
6
g
Cutout slot
