manualshive.com logo in svg

Axminster Trade MJ12-1600 MKII, Manual

The Axminster Trade MJ12-1600 MKII is a versatile woodworking machine designed for professional use. With its robust construction and powerful motor, this manual tool allows users to effortlessly create intricate designs. The user manual for this exceptional product is available for free download on our website, manualshive.com.

Share
Download
background image

Illustration and Parts Description

26

Scoring blade Hex screw access holes

• Height adjuster, (A)

• Left and right adjuster, (B) 

Workpiece clamp shaft (22) with the work 

clamp taken from the mitre fence assembly (3)

Motor and saw assembly

Saw blade tensioning 

bolt for drive belt

Rip fence assembly: Clamping handle, (A) Micro adjuster, 

(B) Rip fence and Clamping handle, (C)

NOTE: Raise the clamping handle to operate the micro adjuster

Main saw table, height adjusting 
bolts, one to each corner beneath 
the table

22

work clamp

Scoring blade drive belt

Saw tilt mechanism

Motor hold down bolts

Saw blade drive belt

A

B

Adjuster lock

A

B

C

Summary of Contents for MJ12-1600 MKII

























































Reviews:

No comments

Related manuals for MJ12-1600 MKII

Wacker Neuson EHB 7 Operator'S Manual preview
EHB 7
Brand: Wacker Neuson Pages: 62
T-Drill T-35 Instruction Manual preview
T-35
Brand: T-Drill Pages: 49
Parkside PSTDA 18-Li B2 Original Operation Manual preview
PSTDA 18-Li B2
Brand: Parkside Pages: 64
FASTER TOOLS FSG-100 Instruction Manual preview
FSG-100
Brand: FASTER TOOLS Pages: 19
CMT ORANGE TOOLS CMT300 Instruction Manual preview
CMT300
Brand: CMT ORANGE TOOLS Pages: 116
Avdel 7539-300X Series Instruction Manual preview
7539-300X Series
Brand: Avdel Pages: 47
Eastwood 51460 Instruction Manual preview
51460
Brand: Eastwood Pages: 20
Gianni WLP-100 Installation Instruction preview
WLP-100
Brand: Gianni Pages: 6
Hakko Electronics FX-1003 Instruction Manual preview
FX-1003
Brand: Hakko Electronics Pages: 2
Dahua Technology DH-PFM363L-D1 User Manual preview
DH-PFM363L-D1
Brand: Dahua Technology Pages: 28
HIKOKI DH 24PH2 Handling Instructions Manual preview
DH 24PH2
Brand: HIKOKI Pages: 48
Stanley Fat Max FME340 Manual preview
Fat Max FME340
Brand: Stanley Pages: 84
Devine MPS 500 User Manual preview
MPS 500
Brand: Devine Pages: 5
HOZAN C-371 Instruction Manual preview
C-371
Brand: HOZAN Pages: 16
Clarke 6500232 User Instructions preview
6500232
Brand: Clarke Pages: 2
Daler Rowney Cotswold Easel Intructions preview
Cotswold Easel
Brand: Daler Rowney Pages: 2
Campbell Hausfeld IN735300AV Operating Instructions Manual preview
IN735300AV
Brand: Campbell Hausfeld Pages: 24
ICT Hybrid Power ICT-IPS-DC12-BMM Instruction Manual preview
Hybrid Power ICT-IPS-DC12-BMM
Brand: ICT Pages: 60

Brands by name

Popular brands

Load more brands