Initial Assembly
15
Fig 40
Fig 41
3. Remove the four bolts and washers from the bottom
corner of the main saw tables frame, see fig 40. Locate
the extension support arm (1), line up the holes in the
support bracket with the holes in the saw frame and
secure with the bolts/washers you removed earlier, see
fig 41.
Fig 42
4. Locate sliding table extension (13). Open up the
supporting arm (1), slot the extension support column
(13) onto the supporting arm pin, see fig 42. Line up the
two ‘T’ bolts on the extension table with the ‘T’ slots to
the side of the sliding table and slide on the extension
table, see fig 43. Lock the extension table in place with
the two lift and shift handles, see fig 44.
5. Slide the operating handle (I) into the ‘T’ slot from the
right hand side to the front of the sliding table (19), turn
the handle clockwise to tighten, see fig 45.
Fig 43-44
‘T’ slot
‘T’ bolt
13
13
Fig 45
Continues Over....
Turn to lock
Bolts and washers
1
Arm pin
Support
column
I
Summary of Contents for MJ12-1600 MKII
