Setup for NetWare (NCP)
AXIS StorPoint NAS 100 User’s Guide
18
Using the Installation Wizard
1. Verify that the NDS tree is synchronized.
2. From within the Administration Web pages, click
Network Settings
.
3. Click
Wizard
. The
Network Settings Wizard
dialog appears.
4. Choose
NetWare (NCP)
. Click
Start
to proceed with the installation.
5. Follow the instructions on the screen. When finished, click
Close
.
6. Click
Detailed View
.
The
Protocols
dialog box appears.
7. Open the
NetWare (NCP)
page and verify the settings.
8. Click
OK
.
9. To verify that the StorPoint NAS was successfully installed, check the Event Log for errors.
Using a Text Editor
1. Verify that the NDS tree is synchronized.
2. Use a standard text editor such as Notepad to edit the configuration parameters. From
Windows Explorer or File Manager, locate the StorPoint NAS configuration file
config.ini
file which is located in the
System/ServerProperties
folder. In NetWare, the default name
of your StorPoint NAS is
AXIS<nnnnnn>_NW
where <nnnnnn> are the last six digits of the
StorPoint NAS serial number.
