AXIS StorPoint NAS
100 User’s Guide
Read Me First
1
Read Me First
This guide applies to the AXIS StorPoint NAS 100 network hard disk server with firmware release
1.00 and subsequent releases until otherwise notified. It is intended for anyone involved in
installing and using the StorPoint NAS. It includes the most basic instructions on how to get your
StorPoint NAS up and running.
For a more detailed description of the StorPoint NAS 100 and its functionality, refer to the “
AXIS
StorPoint NAS 100 User’s Manual”
which is available in PDF format at the Axis Web Site and on
the AXIS Online CD.
To install the StorPoint NAS, start with the Basic Installation:
*Note:
Only required on IP based networks.
When you have completed the Basic Installation, proceed to the section that is relevant to your
network environment:
Basic Installation:
See ...
Stage 1 - Connecting the StorPoint NAS to the Network
Stage 2 - Assigning an IP Address
*
Stage 3 - Basic System Settings
Raid 1 (Mirroring)
page 7
page 8
page 10
page 32
Microsoft & IBM Networking (SMB):
Setup for Microsoft and IBM Networks (SMB)
Accessing the Hard Disks
:
- Windows 95/98 & NT 4
- Windows for Workgroups 3.x
- Windows NT 3.51
- OS/2
page 14
page 24
page 25
page 27
page 28
NetWare (NCP):
Setup for NetWare (NCP)
Accessing the Hard Disks
:
- Windows 95/98 & NT 4
- Windows for Workgroups 3.x
- Windows NT 3.51
page 17
page 24
page 26
page 27
UNIX (NFS):
Setup for UNIX (NFS)
Accessing the Hard Disks
- UNIX
page 21
page 28
Web Browser (HTTP):
Setup for Web Browser (HTTP)
Accessing the Hard Disks
- Web Browser
page 22
page 29
