AXIS Q60-S Series
To reset the product to the factory default settings:
1. Disconnect power from the product.
2. Press and hold the control button and reconnect power. See
Hardware Overview, on
page 10
.
3. Keep the control button pressed for about 15–30 seconds until the status LED indicator
flashes amber.
4. Release the control button. The process is complete when the status LED indicator turns
green. The product has been reset to the factory default settings. If no DHCP server is
available on the network, the default IP address is
192.168.0.90
5. Using the installation and management software tools, assign an IP address, set the
password, and access the video stream.
It is also possible to reset parameters to factory default via the web interface. Go to
Setup
> System Options > Maintenance
.
Further Information
The User Manual is available at
www.axis.com
Visit
www.axis.com/techsup
to check if there is updated firmware available for your network
product. To see the currently installed firmware version, go to
Setup > About
.
Visit Axis learning center
www.axis.com/academy
for useful trainings, webinars, tutorials and
guides.
Warranty Information
For information about Axis’ product warranty and thereto related information, see
www.axis.com/warranty/
30
