AXIS Q60-S Series
I/O terminal connector (external)
6-pin terminal blocks for:
• Digital Input/Output
• Power (DC output)
• Ground (GND)
2
1
4
3
6
5
Function
Pin
Notes
Specifications
GND
1, 4, 6
Ground
DC output
2
Power out
12 V DC, 50 mA
Digital input
0 to +30 V DC
Configurable
I/O 1 (Input or Output)
3
Digital output (transistor –
open collector)
Max load = 100 mA
Max voltage =
+30 V DC
Digital input
0 to +30 V DC
Configurable
I/O 2 (Input or Output)
5
Digital output (transistor –
open collector)
Max load = 100 mA
Max voltage =
+30 V DC
I/O terminal connector (internal)
2-pin terminal block.
Install the Hardware
NOTICE
NOTICE
NOTICE
• The product shall be connected using a shielded network cable (STP) or an optical fiber
cable. All cables connecting the product to the network shall be intended for their
specific use. Make sure that the network devices are installed in accordance with
the manufacturer’s instructions. For information about regulatory requirements, see
Regulatory Information, on page 2
.
• Mount the product with the dome cover facing downward.
• Be careful not to scratch, damage or leave fingerprints on the dome cover because this
could decrease image quality. If possible, keep the protective plastic on the dome cover
until the installation is complete.
18
