AXIS Q60-S Series
4
5
3
1
2
Mounting example (wall bracket sold separately)
1
Alignment indicator – multi-connector cable
2
Alignment indicator – camera
3
Flange
4
Multi-connector cable
5
Guide hole
Access the Product
Use the tools provided on the Installation and Management Software CD to assign an IP address,
set the password and access the video stream. This information is also available from the support
pages on
www.axis.com/techsup/
Reset to Factory Default Settings
Important
Reset to factory default should be used with caution. A reset to factory default will reset
all settings, including the IP address, to the factory default values.
Note
The installation and management software tools are available on the CD supplied with the
product and from the support pages on
www.axis.com/techsup
29
