AXIS Q60-S Series
Multi-Connector Cable
The supplied multi-connector cable is required in order to maintain the camera’s IP rating.
Connect the multi-connector cable to the camera’s multi-connector and to the connectors in the
supplied media converter switch, see
page 10
.
The cable provides the following signals:
• DC power
• Network (Ethernet 10/100Base-T)
• Input/Output (I/O)
1
8
2
7
9
3
6
4
5
Function
Pin – wire
Notes
Specifications
Digital input – Connect to GND
to activate, or leave floating
(unconnected) to deactivate.
0 to +30 V DC
Max load =
100 mA
Configurable
(Input or
Output)
2 – blue
7 – yellow
Digital output – Internal connection
to ground when activated, floating
(unconnected) when deactivated.
If used with an external relay, a
diode must be connected in parallel
with the load, for protection against
voltage transients.
Max voltage =
+30 V DC
RX+
3 – green/white
Ethernet – receiving
RX-
4 – green
Ethernet – receiving
TX+
5 – orange/white
Ethernet – transmitting
TX-
6 – orange
Ethernet – transmitting
GND
8 – black
Ground
12 V power
1, 9 – red
Used to power camera
12–13.2 V DC
Max load = 6 A
Media Converter Switch Connectors
For specifications, see
page 16
.
14
