AXIS Q6032-E PTZ Dome Network Camera
Events
To add additional criteria, select the
Additional conditions
option and add additional triggers. To prevent an action from being
triggered repeatedly, a
Wait at least
time can be set. Enter the time in hours, minutes and seconds, during which the trigger
should be ignored before the action rule can be activated again.
The recording
Duration
of some actions can be set to include time immediately before and after the event. Select
Pre-trigger time
and/or
Post-trigger time
and enter the number of seconds. When
While the rule is active
is enabled and the action is triggered
again during the post-trigger time, the recording time will be extended with another post-trigger time period.
For more information, see the online help
.
Recipients
Recipients receive media
fi
les and noti
fi
cation messages. The following recipients are available:
Recipient
Use with action
Send Images
Send Noti
fi
cation
FTP
Send Images
HTTP
Send Images
Send Noti
fi
cation
Network Share
Send Images
TCP
Send Noti
fi
cation
Note
A network share can also be used as a storage device for recorded video. Go to
System Options > Storage
to con
fi
gure
a network share before setting up a continuous recording or an action rule to record video. See
Storage, on page 43
for more information about storage devices.
To add a recipient:
1. Go to
Events > Recipients
and click
Add
.
2. Enter a descriptive name.
3. Select a recipient
Type
.
4. Enter the information needed for the recipient type.
5. Click
Test
to test the connection to the recipient.
6. Click
OK
.
Schedules
Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside
of
fi
ce hours. Use one of the prede
fi
ned schedules or create a new schedule as described below.
To create a new schedule:
1. Go to
Events > Schedules
and click
Add
.
2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.
3. Click
OK
.
33
