Axis Q6032-E User Manual Download

Page: 2 / 55

About this Document

This manual is intended for administrators and users of AXIS Q6032-E

PTZ Dome Network Camera, and is applicable to

rmware 5.41 and

later. It includes instructions for using and managing the product on

your network. Previous experience of networking will be of use when

using this product. Some knowledge of UNIX or Linux-based systems

may also be bene

cial, for developing shell scripts and applications.

Later versions of this document will be posted to the Axis website,

as required. See also the product’s online help, available via the

web-based interface.

Liability

Every care has been taken in the preparation of this manual. Please

inform your local Axis of

ce of any inaccuracies or omissions. Axis

Communications AB cannot be held responsible for any technical or

typographical errors and reserves the right to make changes to the

product and manuals without prior notice. Axis Communications AB

makes no warranty of any kind with regard to the material contained

within this document, including, but not limited to, the implied

warranties of merchantability and

tness for a particular purpose. Axis

Communications AB shall not be liable nor responsible for incidental or

consequential damages in connection with the furnishing, performance

or use of this material. This product is only to be used for its intended

purpose.

Intellectual Property Rights

Axis AB has intellectual property rights relating to technology embodied

in the product described in this document. In particular, and without

limitation, these intellectual property rights may include one or more

of the patents listed at http://www.axis.com/patent.htm and one or

more additional patents or pending patent applications in the US and

other countries.
This product contains licensed third-party software. See the menu item

“About” in the product’s user interface for more information.
This product contains source code copyright Apple Computer,

Inc., under the terms of Apple Public Source License 2.0 (see

http://www.opensource.apple.com/apsl). The source code is available

from http://developer.apple.com/darwin/projects/bonjour/

Equipment Modi

cations

This equipment must be installed and used in strict accordance with the

instructions given in the user documentation. This equipment contains

no user-serviceable components. Unauthorized equipment changes or

modi

cations will invalidate all applicable regulatory certi

cations

and approvals.

Trademark Acknowledgments

Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux, Microsoft,

Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, Windows Vista and

WWW are registered trademarks of the respective holders. Java and

all Java-based trademarks and logos are trademarks or registered

trademarks of Oracle and/or its af

liates. UPnP

is a certi

cation

mark of the UPnP

Implementers Corporation.

Electromagnetic Compatibility (EMC)

This equipment has been designed and tested to ful

ll applicable

standards for:

•

Radio frequency emission when installed according to the

instructions and used in its intended environment.

•

Immunity to electrical and electromagnetic phenomena when

installed according to the instructions and used in its intended

environment.

USA

This equipment has been tested using a shielded network cable (STP)

and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canada

This Class B digital apparatus complies with Canadian ICES-003.

Europe

This digital equipment ful

lls the requirements for RF emission

according to the Class B limit of EN 55022.
This product ful

lls the requirements for immunity according

to EN 61000-6-1 residential, commercial and light-industrial

environments.
This product ful

lls the requirements for immunity according to

EN 61000-6-2 industrial environments.
This product ful

lls the requirements for immunity according to

EN 55024 of

ce and commercial environments.

Australia/New Zealand

This digital equipment ful

lls the requirements for RF emission

according to the Class B limit of AS/NZS CISPR 22.

Korea

이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사

용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다.

Japan

この装置は、クラスB 情報技術装置です。この装置は、家庭

環境で使用することを目的としていますが、この装置がラジ

オやテレビジョン受信機に近接して使用されると、受信障

害を引き起こすことがあります。取扱説明書に従って正し

い取り扱いをして下さい。

Safety

This product complies with EN/IEC 60950-1 and EN/IEC 60950-22,

Safety of Information Technology Equipment.
The power supply used with this product shall ful

ll the requirements

for Safety Extra Low Voltage (SELV) and Limited Power Source (LPS)

according to EN/IEC/UL 60950-1.

Support

Should you require any technical assistance, please contact your Axis

reseller. If your questions cannot be answered immediately, your

reseller will forward your queries through the appropriate channels to

ensure a rapid response. If you are connected to the Internet, you can:

•

download user documentation and software updates

•

nd answers to resolved problems in the FAQ database. Search

by product, category, or phrase

•

report problems to Axis support staff by logging in to your private

support area

•

chat with Axis support staff (selected countries only)

•

visit Axis Support at www.axis.com/techsup/

Learn More!

Visit Axis learning center www.axis.com/academy for useful trainings,

webinars, tutorials and guides.

Summary of Contents for Q6032-E
























































Search results

Summary of Contents for Q6032-E

Reviews:

Related manuals for Q6032-E

Brands by name

Popular brands

Axis Q6032-E, User Manual

Search results

Summary of Contents for Q6032-E

Reviews:

Related manuals for Q6032-E

Brands by name

Popular brands