Axis Q6032-E User Manual Download

Page: 9 / 55

AXIS Q6032-E PTZ Dome Network Camera

Accessing the Product

Activate the product’s heater with this button. Enable this button from

Live View Con

g > Action Buttons.

Enable or disable the

Gatekeeper

by selecting On or Off from the drop-down list. See

page 25

for more information

about Gatekeeper.

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See

AXIS Media Control (AMC), on page 11

for more

information. The toolbar displays the following buttons:

The

Play

button connects to the Axis product and starts playing a media stream.

The

Stop

button stops the media stream.

The

Snapshot

button takes a snapshot of the video image. The location where the image is saved can be speci

in the AMC Control Panel.

Click the

View Full Screen

button and the video image will

ll the entire screen. Press ESC (Escape) on the computer

keyboard to cancel full screen view.

The

Record

button is used to record the current video stream. The location where the recording is saved can be speci

in the AMC Control Panel.

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for speci

ed users under

System Options > Security > Users

With the

PTZ Control Queue

enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or

release control of the PTZ controls. The PTZ Control Queue is set up under

PTZ > Control Queue

Click the

Emulate joystick mode

button and click in the image to move the camera view in the direction of the

mouse pointer.

Click the

Center mode

button and click in the image to center the camera view on that position. The center mode

button could also be used to zoom in on a speci

c area. Click in the image and drag to draw a rectangle surrounding

the area to be magni

ed. To zoom out, rotate the mouse wheel.

Click the

Ctrl panel

button to open the PTZ control panel which provides additional PTZ controls.

User-de

ned buttons can also appear in the Control panel. See

Controls, on page 27

Select a recorded tour and click

to play a previously recorded tour and click

to stop. See

Tour Recording, on page 26

Select a PTZ preset position to steer the camera view to the saved position. See

Preset Positions,

on page 23

Click the

Start Auto Track

button to start autotracking directly from the Live View page. See

Autotracking, on page 23

Summary of Contents for Q6032-E
























































Search results

Summary of Contents for Q6032-E

Reviews:

Related manuals for Q6032-E

Brands by name

Popular brands

Axis Q6032-E, User Manual

Search results

Summary of Contents for Q6032-E

Reviews:

Related manuals for Q6032-E

Brands by name

Popular brands