Axis Q6032-E User Manual Download Page 54

Page: 54 / 55

AXIS Q6032-E PTZ Dome Network Camera

Technical Speci

cations

Function/group

Item

Speci

cations

Weight

Camera: 3.5 kg (7.7 lb.)

Included

accessories

AXIS T8124 High PoE Midspan 1-port, IP66-rated RJ-45 connector kit, sunshield,

Installation Guide, Installation and Management Software CD, Windows decoder 1-user

license

Video

management

software

AXIS Camera Companion (software included on CD) — Basic surveillance for small

businesses, where video is recorded to edge storage

AXIS Camera Station (sold separately) — Fully featured surveillance for medium-sized

installations, where video is recorded on a system server

For more information and software applications from partners, see

www.axis.com/products/video/software/

Optional

accessories

Smoked dome cover

Mounting Accessories

Video Surveillance Control Board

Illuminators

Installation Display

Multi-user decoder license pack

Midspan

Performance Considerations

When settings up your system, it is important to consider how various settings and situations will affect performance. Some factors

affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both. If the load on the

CPU reaches its maximum, this will also affect the frame rate.

The following factors are among the most important to consider:

• High image resolution and/or lower compression levels result in images containing more data. Bandwidth affected.

• Access by large numbers of Motion JPEG and/or unicast H.264 clients. Bandwidth affected.

• Simultaneous viewing of different streams (resolution, compression) by different clients. Effect on frame rate and bandwidth.

• Accessing Motion JPEG and H.264 video streams simultaneously. Frame rate and bandwidth affected.

• Heavy usage of event settings affect the product’s CPU load. Frame rate affected.

• Heavy network utilization due to poor infrastructure. Bandwidth affected.

• Viewing on poorly performing client computers lowers perceived performance. Frame rate affected.

Summary of Contents for Q6032-E
























































Search results

Summary of Contents for Q6032-E

Reviews:

Related manuals for Q6032-E

Brands by name

Popular brands

Axis Q6032-E, User Manual

Search results

Summary of Contents for Q6032-E

Reviews:

Related manuals for Q6032-E

Brands by name

Popular brands