Axis P3384-VE User Manual Download Page 10

Page: 10 / 67

AXIS P3384–V Fixed Dome Network Camera

Access the Product

Click the

Active/Inactive

buttons to manually activate and inactive the product’s output port. For information

about how to enable and configure output buttons, see

page 27

The

Manual Trigger

button is used to trigger an action rule from the Live View page. For information about how to

configure and enable the button, see

Manual Trigger on page 10

Click

Snapshot

to save a snapshot of the video image. This button is primarily intended for use when the

AXIS Media Control viewer toolbar is not available. Enable this button from

Live View Config > Action Buttons

The

Audio clip

drop-down list allows you to play an audio clip from the Live View page. Select the

audio clip and click the

Play

button.

The product’s fan is controlled by the ambient temperature and is turned on and off automatically. If required, the
fan can be activated manually by clicking the

Fan

button. To show the button, go to

Setup > Live View Config

Under

Action Buttons

, select

Show fan button

and specify the number of minutes the fan should be activated.

Activate or de-activate IR illumination from

Setup

Video & Audio

Camera Settings

. Move the slider to

increase or decrease the intensity of the LEDs. Enable this button from

Live View Config > Action Buttons

Manual Trigger

The

Manual Trigger

is used to trigger an action rule from the Live View page. The manual trigger can for example be used to

validate actions during product installation and configuration.

To configure the manual trigger:

1. Go to

Setup > Events

2. Click

Add

to add a new action rule.

3. From the

Trigger

drop-down list, select

Input Signal

4. From the second drop-down list, select

Manual Trigger

5. Select the desired action and configure the other settings as required.

For more information about action rules, see

Events on page 35

To show the manual trigger buttons in the Live View page:

1. Go to

Setup > Live View Config

2. Under

Action Buttons

, select

Show manual trigger button

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See

AXIS Media Control (AMC) on page 13

for more

information. The toolbar displays the following buttons:

The

Play

button connects to the Axis product and starts playing a media stream.

The

Stop

button stops the media stream.

Summary of Contents for P3384-VE




































































Search results

Summary of Contents for P3384-VE

Reviews:

Related manuals for P3384-VE

Brands by name

Popular brands

Axis P3384-VE, User Manual

Search results

Summary of Contents for P3384-VE

Reviews:

Related manuals for P3384-VE

Brands by name

Popular brands