Axis AXIS 560 User Manual Download

Page: 154 / 172

UNIX

ntosh

Appendix B: The Parameter List

AXIS 560/660 User’s Manual

154

--- TCP/IP MENU

TCP_ENB.

: YES

TCP/IP Enabled

INT_ADDR.

: 0 0 0 0

Internet Address

DEF_ROUT.

: 0 0 0 0

Default Router Address
(0.0.0.0 for no router)

NET_MASK.

: 0 0 0 0

Net Mask
(e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)

PROS_PWD.

: netprinter

PROS Password

PROS_PRT.

: 35

PROS TCP Port Number

LPD_BANN.

: OFF (OFF, AUTO, LAST)

LPD Banner Page Mode

DHCP_ENB.

: YES

DHCP Enabled

BOOTP_ENB.

: YES

BOOTP Enabled

RARP_ENB.

: YES

RARP Enabled

WINS_ENB.

: YES

WINS Enabled

WINS_ADDR1.

: 0 0 0 0

Primary WINS Server Address

WINS_ADDR2.

: 0 0 0 0

Secondary WINS Server Address

NBT_SCOPE_ID. :

NBT Scope ID
(Defines the NetBIOS scope to be used with WINS name registration)

DNS_ENB.

: YES

DNS Enabled

DNS_ADDR1.

: 0 0 0 0

Primary DNS Server Address

DNS_ADDR2.

: 0 0 0 0

Secondary DNS Server Address

DOMAIN_NAME.

Domain Name (Defines the domain to which the AXIS 560/660 belongs)

SLP_SCOPE_LIST.: DEFAULT

Defines the SLP scope to which the AXIS 560/660 belongs.

RTN_OPT.

: NO

Reverse Telnet Options Enabled

RTEL_PR1.

: 0

PR1 Reverse Telnet Port Number

RTEL_PR2.

: 0

PR2 Reverse Telnet Port Number

RTEL_PR3.

: 0

PR3 Reverse Telnet Port Number

RTEL_PR4.

: 0

PR4 Reverse Telnet Port Number

RTEL_PR5.

: 0

PR5 Reverse Telnet Port Number

RTEL_PR6.

: 0

PR6 Reverse Telnet Port Number

RTEL_PR7.

: 0

PR7 Reverse Telnet Port Number

RTEL_PR8.

: 0

PR8 Reverse Telnet Port Number

---

SNMP MENU

READ_COM.

: public

Read Community

WRT_COM.

: pass

Read/Write Community

TRAPADDR.

: 0 0 0 0

Trap Address

TRAP_COM.

: public

Trap Community

SYS_NAME.

System Name

SNMP_AUT.

: DISABLE

(DISABLE, ENABLE)

Authentication Failure Trap

TRAP_PRT.

: DISABLE

(DISABLE, ENABLE)

Printer Failure Trap

Summary of Contents for AXIS 560













































































































































































Search results

Summary of Contents for AXIS 560

Reviews:

Related manuals for AXIS 560

Brands by name

Popular brands

Axis AXIS 560, User Manual

Search results

Summary of Contents for AXIS 560

Reviews:

Related manuals for AXIS 560

Brands by name

Popular brands