Axis AXIS 560 User Manual Download Page 120

Page: 120 / 172

UNIX

ntosh

Section 9: Management & Configuration

AXIS 560/660 User’s Manual

120

Changing the

parameter values

AXIS NetPilot provides you with two useful tools for changing
parameter values:

•

Property pages:

Use the Property pages if you have little
experience in editing config files and need
a user-friendly interface.

•

Parameter List Editor: Use this fast and efficient tool if you have

considerable experience in editing config
files.

The Property Pages

The Property pages provide an easy way to view and change the
parameters. Each property page comprises a set of selection tabs that
are appropriate to your operating environments. Each parameter can
be edited by selecting the relevant box.

Follow the instructions below to open and edit an arbitrary Property
Page:

1. Select the AXIS 560/660 from the ‘Network Print Servers’ folder.

2. Click the

Properties

button on the AXIS NetPilot toolbar or

choose

Properties

from the

Setup

menu.

3. Select the tab that includes the parameter you want to change.

4. Change the value.

5. Click

Apply

to save the change to the print server. (If you select

instead, the Property pages closes automatically after the

change has been saved).

The Parameter

List Editor

The Parameter List Editor is a simple editor that enables you to:

•

Edit the AXIS 560/660 config file.

•

Save customized config files to your hard disk.

•

configure several network print servers simultaneously.

Summary of Contents for AXIS 560













































































































































































Search results

Summary of Contents for AXIS 560

Reviews:

Brands by name

Popular brands

Axis AXIS 560, User Manual

Search results

Summary of Contents for AXIS 560

Reviews:

Brands by name

Popular brands