Wi
n
d
ow
s
Section 5: Setting Up - Windows
AXIS 560/660 User’s Manual
76
Windows 3.1 and Windows for Workgroups
Windows 3.1
In order to print to a network printer, Windows 3.1 requires the
installation of network support, such as the LAN Server or LAN
Manager Workstation software. When installed, proceed as described
under Windows for Workgroups below.
Windows for
Workgroups
Peer-to-Peer Printing
Follow the instructions below to install your AXIS 560/660 for peer-
to-peer printing at a Windows for Workgroups workstation:
1. Double-click the
AXIS Print Utility
icon.
2. In the
Port
menu, click
Add
.
3. In the NPS Port list, select the AXIS 560/660 port. The ports
appear as <name>.LP1, <name>.LP2, and <name>.CM1, where
<name> is AX followed by the last six digits of the AXIS 560/660
serial number, e.g. AX100086.
4. Accept or change the suggested Windows port name and type any
required comment in the Description field. Make a note of the
Windows port name as you will need this later, then click
OK
to
install the Windows port.
5. In the
Port
menu, click
Connect...
to bring up the Windows
Printers dialog.
6. Select a printer driver from the list of Installed Printers (or click
Add>> to install a new driver), then click
Connect...
7. Select the Windows port name from step 4 above (this name can
be found at the bottom of the Ports list).
8. Click
OK
to close the Connect dialog, and
Close
to close Printers.
The setup is completed and you can now print through your
AXIS 560/660.
