UNIX
Section 8: Setting Up - UNIX
AXIS 560/660 User’s Manual
92
Section 8 Setting Up - UNIX
Installation in the UNIX Environment
Having performed the basic TCP/IP setup procedures as defined in
Assigning an IP address, on page 30 and onwards, you are now able to
print in interactive mode using LPR, FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 560/660 into your
host spooler, you can use the Axis automatic installation script
axinstall. This utility software is resident on the AXIS 560/660 and
can be downloaded to your host using FTP, so no disks are required.
The axinstall script can also be downloaded from the Axis WWW
home page at
http://www.axis.com/
and it is available on the AXIS
Online CD.
Having completed this operation, the printer connected to the AXIS
560/660 will appear as though they are directly connected to the host
printer spooler.
If you intend to operate your AXIS 560/660 in a multiprotocol
environment, you should also proceed according to one or more of the
following sections, as appropriate to your network.
Section 4 Setting Up - NetWare, on page 43
Section 5 Setting Up - Windows, on page 54
Section 6 Setting Up - OS/2, on page 80
Section 7 Setting Up - Macintosh, on page 86
