20
USER MANUAL
__________________________________________________________________________________________________________________
15.3 Pieces counting function (PCS)
The
function
allows
counting
identical pieces, for example pills or
buttons
included
into
weighed
portion.
In order to star the function, tare the
balance, put several pieces and press
MENU
key. Then, using
T
key,
choose
PCS
and
PCS on
.
Measurement is performed in two
phases:
- first phase – calculating the mass of
single item basing on a sample
containing defined amount of
pieces: 5, 10, 20, 50, 100, 200 or
500 pieces; There is also a
possibility to insert amount of
pieces by choosing
PCS . .
option
or to insert single piece weight
PCS
uM
. Use the following keys:
- increase digit,
- decimal point,
T
- next position,
MENU
– finish.
- second phase – counting pieces in
weighed portion.
It is advised that mass of single piece
is greater than reading unit and mass
of sample used in first phase is bigger
than 100 reading units.
In order to temporarily return to
displaying in mass units use
key.
Using this key once more will cause
return to displaying in pieces.
Comments:
PCS Err message indicates that a sample
was not put on a pan or a mass of single
piece is less than one reading.
To select previously used value choose “..”
option instead of pieces quantity in a
sample.
0 pcs
0.00 g
12.05 g
23.04 g
PCS
PCS oFF
PCS on
5
12
12 pcs
MENU
T
T
T
T
PCS 5
PCS . .
