USER MANUAL
29
14.6 Function for setting serial port
To enable cooperation with a printer (or a computer), transmission parameters in
both devices have to be the same.
This function allows to set the following transmission parameters:
-
send and receive baud rate (1 200
115 200bps),
-
number of bits in single character (7 or 8 bit),
-
parity control (none, even, odd),
-
protocole type (default protocol is LONG),
-
transmission mode (after pressing
key if result is stable, after pressing
key independently of stable result, automatically after putting a load on the pan
and weighing result stabilisation, continuous transmission every 0,1s).
Press
MENU
key, choose
Serial Port
with the cursor and press
ENTER
key.
Check if port interface settings are
compliant
with
parameters
of
connected external device. If not,
using
∨
and
∧
keys move the cursor on
parameter that should be set and press
ENTER
key.
Set proper value of parameter using <
and > keys and press
ENTER
.
Leave the function by pressing
MENU
key or using
Exit
option.
USER FUNCTIONS&OPT.
Autotaring
PCS counting
. . .
Serial port
. . .
SERIAL PORT \ PORT 1
1. Baudrate :
4800
2. Bits :
8-bit
3. Parity :
none
4. Protocol :
LONG
5. Sending mode : stab.
6. Exit
SERIAL PORT \ PORT 1
1. Baudrate :
<4800>
2. Bits :
8-bit
3. Parity :
none
4. Protocol :
LONG
5. Sending mode : stab.
6. Exit
USER FUNCTIONS&OPT./SERIAL PORT
1. Port 1
2. Port 2
3. Wyjście
