manualshive.com logo in svg

Axis 850, User Manual

Share
Download
Axis 850 User Manual Download Page 47

Section 5: Access Control and Set-up

AXIS 850/950 User’s Manual

47

InternetAddress

ServerName

NetMask

The access is controlled by creating or editing NetWareUser/Group 
entries in the access control files in the volumes folder on the CD-
ROM server. The following values can be used:

You may add as many NetWareUser/Group parameters as you 
require. See also the examples below. To set up the parameters, do as 
follows:

1. Locate the proper file in the volumes folder. 

2. Open the file using the Windows Notepad Editor or any other 

editor.

3. Edit or add NetWareUser/Group entries as required.

4. Save the file.

Example 1:
Grant access to all users in the group ‘salesdep’ and to the user 
‘Ray’ who is not a member of ‘salesdep’:

Example 2:
Grant all NetWare users access:

Note:

❏

You can always access the CD-ROM server using the user name 
‘supervisor’ and the password specified by the parameter 
‘SupervisorPassword’ in the config.ini file. By default the password 
is ‘pass’.

NetWareUser/Group

Description

*

Any user has access

<any user or group>

Users with this name or in this group are granted access

<entry not present>

No access from NetWare

NetWareUser/Group = salesdep

NetWareUser/Group = Ray

NetWareUser/Group = *

Summary of Contents for 850






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands