manualshive.com logo in svg

Axis 850, User Manual

Share
Download
Axis 850 User Manual Download Page 26

Section 4: Using the Axis CD-ROM Server

26

AXIS 850/950 User’s Manual

<cd0>

<cd1>

…

<cd6>

Novell NetWare (IPX)

When using NetWare, you access the CD-ROM server exactly as you 
would access any other NetWare file server. Below you will find 
examples on how to access the Axis CD-ROM server using Novell’s 
clients for Windows 95, Windows for Workgroups and DOS.

Note:

❏

The examples below assume that you have not changed the 
NetWare server name in the config.ini file on the CD-ROM 
server. The default server name in the NetWare environment is 

AXIS<nnnnnn>_NW

, where 

<nnnnnn>

 are the six last digits of the 

CD-ROM server serial number. If you have changed the server 
name, please use the new name where the examples refer to the 
default name.

Windows 95

1. Start the Windows Explorer from the Start/Programs Menu.

2. Expand the Network Neighborhood icon. The available 

resources are displayed:

Summary of Contents for 850






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands