INSTRUCTION MANUAL
13
_____________________________________________________________________________________________________________________
7.1 Connecting a computer, printer or label printer
The scale can be equipped with one or two serial interfaces RS232C, USB, LAN or Wi-Fi designed to
cooperate:
-
with computer – the scale sends data after pressing
key or after initiation signal from
computer,
-
with printer - sending data after pressing
key or automatically after putting on/off a sample
and measurement stabilization,
-
with label printer – after pressing
the scale sends set of instructions for label printer starting
from label number set in special funcion
LabEL
.
Set of send data is set using special function
.
The following data can be send:
-
Header (scale type, Max, d, e, serial number),
-
Operator identification number,
-
Successive printout number (measurement),
-
Identification number or product bar code,
-
Number of pcs (PCS function only),
-
Single detail mass (PCS function only),
-
Nett weight,
-
Tare (package mass),
-
Gross weight,
-
Total mass (Total function only).
The way of sending data and transmission parameters is set using
SErIAL
special function.
If the scale is equipped with two serial joints (interfaces)
and
SErIAL
function is set independently for
both interfaces.
If scale cooperates with a computer then the computer must have a special program. Dedicated programs
are also offered by AXIS.
Needed drivers and instructions can be found on the CD supplied with Axis scales.
