INSTRUCTION MANUAL
49
_____________________________________________________________________________________________________________________
Users database is edited by similar function named
USEr
and consists of several options:
-
USEr Id
– user identification number,
-
USErCLr
(shows up if user was selected earlier) – turns off actual user selection,
-
USEr nA
– user name (inscribed from PC or scanner),
-
Prn_U
– sending users database to port.
Saving data is also done by
SAVE
option.
Recalling from database
The fastest way to recall product from database is
to readout his barcode number (
Prod bA
) by using
barcode reader (option). It can be done in any
moment.
After readout of proper barcode scale indicates one
of communicates:
-
SCAn
– barcode from outside the base accepted
(
Std
mode),
-
not Found
– barcode from outside the base not
accepted and no product is selected (
LIMIt
mode),
-
Found
– product barcode found in database and
data recalled.
Attention:
If the scale doesn’t indicate any
communicate, check barcode reader connections,
port configuration and transmission protocol
(
SErIAL function
).
Other fast way is to press and hold
MENU
key
(about 3s).
Prod Id
communicate will appear.
Relase the key and inscribe identification number. If
the number is already saved in base
Found
communicate appears and all the product data is
recalled.
To edit data choose
EdIt
option and use following
keys:
0
- increasing digit,
T
- next dixit,
MENU – end of inscribing.
Product recalling is also possible by using
Prod
and
Prod Id
options (previous site).
If You hold
MENU
key for a longer time (about 6s)
ProdCLr
communicate will appear and actual
product selection will be turned off.
3 sek.
0
kg
0
kg
