INSTRUCTION MANUAL
3
_____________________________________________________________________________________________________________________
1.
General description
Drive-through balances from 4B/NA series in basic version from lacquered steel,
with SE-01/A/18 meter, are designed for operation in light environmental
conditions.
Manual describes standard balance version. In case of special meter use, e.g.
dosing meter, it is necessary to use documentation for meter as well.
All balances are tested in respect of metrology. According to order, balances may
be verified or calibrated.
EC verification (conformity assessment) of balances is required for special
applications, mentioned in Ministry of Labour and Social Policy decree from
11.12.2003 (trade, tariffs, pharmacy recipes, medical and pharmaceutical analysis,
packing of goods). For other applications it is recommended to replace verification
with calibration.
Verified balances have the following verification features:
- protection stamps, located on balance meter and converters connection box
(installed under the bearing surface).
- Office of Measures marks and green metrological mark, located on the rating plate.
EC verification is valid for 25 months from 1st of December of year, when the EC
verification took place, under condition of stamp integrity.
Balances classification (PKWiU code) 29.24.23.
Certificates:
Certificate
Certificate
of type approval
DIN EN ISO 9001:2000
no. PL 04 020 no. 78 100 6386
(AXIS management system)
