INSTRUCTION MANUAL
9
_____________________________________________________________________________________________________________________
9.
Operation principles
1.
Before each measurement the balance should be properly zeroed, which is
signalled by “
→0←
” indicator. If the zero indication is not shown when the
balance is unloaded, or "----" is displayed, press the "
→0←
" key.
2.
The balance enables tare setting in the whole measuring range. It is performed
by pressing "
→
T
←
" key.
3.
Weighed mass should be placed in the platform centre.
Do not drop weighed objects on the platform.
Do not overload the balance over 20% of maximum load.
4.
The weighing result should be read during the " " indicator lighting, which
indicates the result stabilization.
5.
When there is no weighing, but the balance should be ready for operation, it may be switched
off by I/ key.
It causes the balance reading system deactivation end entering the
standby mode.
Balance turning on is performed by pressing " I/ " key.
6.
Protect the balance from dust, aggressive dusts and liquids. For cleaning
purposes use water and dry it.
