AXIS P32 Dome Camera Series
The device interface
Certificate
: Select a certificate to enable HTTPS for the device.
Friendly name
Bonjour
®
: Turn on to allow automatic discovery on the network.
Bonjour name
: Enter a friendly name to be visible on the network. The default name is the device name and MAC address.
Use UPnP
®
: Turn on to allow automatic discovery on the network.
UPnP name
: Enter a friendly name to be visible on the network. The default name is the device name and MAC address.
One-click cloud connection
One-click cloud connection (O3C) together with an O3C service provides easy and secure internet access to live and recorded video
from any location. For more information, see
axis.com/end-to-end-solutions/hosted-services
Allow O3C
:
•
One-click
: The default setting. Press and hold the control button on the device to connect to an O3C service over the
internet. You need to register the device with the O3C service within 24 hours after you press the control button.
Otherwise, the device disconnects from the O3C service. Once you have registered the device,
Always
is enabled and
the device stays connected to the O3C service.
•
Always
: The device constantly attempts to connect to an O3C service over the internet. Once you have registered the
device, it stays connected to the O3C service. Use this option if the control button on the device is out of reach.
•
No
: Disables the O3C service.
Proxy settings
: If needed, enter the proxy settings to connect to the HTTP server.
Host
: Enter the proxy server’s address.
Port
: Enter the port number used for access.
Login
and
Password
: If needed, enter username and password for the proxy server.
Authentication method
:
•
Basic
: This method is the most compatible authentication scheme for HTTP. It’s less secure than the
Digest
method
because it sends the username and password unencrypted to the server.
•
Digest
: This method is more secure because it always transfers the password encrypted across the network.
•
Auto
: This option lets the device select the authentication method depending on the supported methods. It prioritizes
the
Digest
method over the
Basic
method.
Owner authentication key (OAK)
: Click
Get key
to fetch the owner authentication key. This is only possible if the device is
connected to the internet without a firewall or proxy.
SNMP
The Simple Network Management Protocol (SNMP) allows remote management of network devices.
SNMP
: Select the version of SNMP to use.
•
v1 and v2c
:
-
Read community
: Enter the community name that has read-only access to all supported SNMP objects. The
default value is
public
.
-
Write community
: Enter the community name that has read/write access to all supported SNMP objects
(except read-only objects). The default value is
write
.
-
Activate traps
: Turn on to activate trap reporting. The device uses traps to send messages for important
events or status changes to a management system. In the device interface, you can set up traps for SNMP v1
and v2c. Traps are automatically turned off if you change to SNMP v3 or turn off SNMP. If you use SNMP v3,
you can set up traps through the SNMP v3 management application.
-
Trap address
: Enter the IP address or host name of the management server.
31
