AXIS P32 Dome Camera Series
The device interface
-
Proxy
: Click to add a proxy.
-
Prioritize
: If you have added two or more proxies, click to prioritize them.
-
Server address
: Enter the IP address of the SIP proxy server.
-
Username
: If required, enter the username for the SIP proxy server.
-
Password
: If required, enter the password for the SIP proxy server.
•
Video
-
View area
: Select the view area to use for video calls. If you select none, the native view is used.
-
Resolution
: Select the resolution to use for video calls. The resolution affects the required bandwidth.
-
Frame rate
: Select the number of frames per second for video calls. The frame rate affects the required
bandwidth.
•
DTMF
-
Use RTP (RFC2833)
: Select to allow dual-tone multifrequency (DTMF) signaling, other tone signals and
telephony events in RTP packets.
-
Use SIP INFO (RFC2976)
: Select to include the INFO method to the SIP protocol. The INFO method adds
optional application layer information, generally related to the session.
-
DTMF sequence
: Click to add an action rule triggered by touch-tone. You must activate the action
rule in the
Events
tab.
-
Sequence
: Enter the characters to trigger the action rule. Allowed characters: 0–9, A-D, #, and *.
-
Description
: Enter a description of the action to be triggered.
SIP test call
SIP account
: Select which account to make the test call from.
SIP address
: Enter a SIP address and click
to make a test call and verify that the account works.
Storage
Network storage
Add network storage
: Click to add a network share where you can save recordings.
•
Address
: Enter the IP address or host name of the host server, typically a NAS (Network Attached Storage). We
recommend you to configure the host to use a fixed IP address (not DHCP since a dynamic IP address can change) or
that you use DNS. Windows SMB/CIFS names are not supported.
•
Network share
: Enter the name of the shared location on the host server. Several Axis devices can use the same
network share, since each device gets its own folder.
•
User
: If the server requires a login, enter the username. To log in to a specific domain server, type
DOMAIN\username
.
•
Password
: If the server requires a login, enter the password.
•
SMB version
: Select the SMB storage protocol version to connect to the NAS. If you select
Auto
, the device tries
to negotiate one of the secure versions SMB: 3.02, 3.0, or 2.1. Select 1.0 or 2.0 to connect to older NAS that don’t
support higher versions. You can read more about SMB support in Axis devices
.
•
Add share even if connection test fails
: Select to add the network share even if an error is discovered during the
connection test. The error can be, for example, that you didn’t enter a password even though the server requires one.
Remove network storage
: Click to remove the connection to the network share. This removes all settings for the network share.
Write protect
: Turn on to stop writing to the network share and protect recordings from being removed. You can’t format a
write-protected network share.
Ignore
: Turn on to stop storing recordings on the network share.
Retention time
: Select how long to keep recordings, to limit the amount of old recordings or to comply with regulations regarding
data storage. If the network storage becomes full, old recordings are removed before the selected time period has passed.
Tools
•
Test connection
: Test the connection to the network share.
41
