manualshive.com logo in svg

Axion AC-AXION-4, User Manual

Share
Download
Axion AC-AXION-4 User Manual Download Page 51

51

The maximum liability of AVPro Global Holdings LLC under this limited warranty shall not exceed the actual 

purchase price paid for the product� AVPro Global Holdings LLC is not responsible for direct, special, inciden-

tal or consequential damages resulting from any breach of warranty or condition, or under any other legal 

theory to the maximum extent permitted by law�

Taxes, Duties, VAT, and freight forwarding service charges are not covered or paid for by this warranty�

Obsolescence or incompatibility with newly invented technologies (after manufacture of product) is not cov-

ered by this warranty� 

Obsolescence is defined as:

“Peripherals are rendered obsolete when current technology does not support product repair or re-manu-

facture� Obsolete products cannot be remanufactured because advanced technologies supersede original 

product manufacturer capabilities� Because of performance, price and functionality issues, product redevel-

opment is not an option�”

Discontinued or out of production items will be credited at fair market value towards a current product of 

equal or comparable capabilities and cost� Fair market value is determined by AVPro Edge� 

Exclusive Remedy

To the maximum extent permitted by law, this limited warranty and the remedies set forth above are exclu-

sive and in lieu of all other warranties, remedies and conditions, whether oral or written, express or implied� 

To the maximum extent permitted by law, AVPro Global Holdings LLC specifically disclaims any and all im

-

plied warranties, including, without limitation, warranties of merchantability and fitness for a particular pur

-

pose� If AVPro Global Holdings LLC cannot lawfully disclaim or exclude implied warranties under applicable 

law, then all implied warranties covering this product, including warranties of merchantability and fitness for 

a particular purpose, shall apply to this product as provided under applicable law�

This warranty supersedes all other warranties, remedies and conditions, whether oral or written, express or 

implied�

Summary of Contents for AC-AXION-4























































Reviews:

No comments

Brands by name

Popular brands

Load more brands