![Axion AC-AXION-4 User Manual Download Page 19](http://html1.mh-extra.com/html/axion/ac-axion-4/ac-axion-4_user-manual_3037776019.webp)
19
WebUI: I/O Config - Input Settings Cont.
Input Settings Audio Mode -
There are 7 settings available (Default state is off/disabled).
The AC-AXION-4 automatically down-mixes the source audio signals down to 2 CH� for the extracted audio
Toslink and balanced 5pin ports. Changing the audio mode here will affect that inputs audio on all the ex
-
tracted ports�
Default (off), Low , Mid , High , Middle FX, Full FX, and Voice FX.
NOTE: There are also EQ, Balance (left/right), and Delay settings you can change per Output, see WebUI:
I/O Config - Output Settings on pages 20-21 for more info.
Input Settings Signal -
The Signal Indicator on the HDMI INPUTS shows the current state of the connec-
tion HDMI source� Green means the HDMI source is detected, red means that the source is not detected� If
red verify that source is powered on and that the HDMI cable is properly connected to the source and to the
back of the matrix�
Global Input Settings -
There are two settings available
·Supports Dolby MAT - Check this box to enable Dolby MAT audio
·Requires Dolby Vision Low Latency - Check this box to require Dolby Vision Low Latency (Player-led)
over Standard Dolby Vision (TV-Led). Sources like the Apple TV and X-Box Series X use Low Latency.
Output Settings Label
- Use this to give an name/alias to your outputs (Living Room, Den, Kitchen, etc)�
Note: There is a 15 character limit to this field, the name will replace the default “OUT #” throughout the
rest of the WebUI (for instance the Video Matrix tab)�
Output Settings State -
This drop-down has 3 settings, just like the input settings you can Enable or dis-
able this port� In addition you can also choose Test Pattern to enable a 1080P color bar test pattern on that
output� This is helpful in verifying the signal chain from Matrix to sync (display)� To disable the test pattern,
change the state back to Enabled (default)�
WebUI: I/O Config - Output Settings
Summary of Contents for AC-AXION-4
