manualshive.com logo in svg

Axion AC-AXION-4, User Manual

Share
Download
Axion AC-AXION-4 User Manual Download Page 50

50

RED TAPE.

AVPro Edge is not responsible for untraceable purchases or those that were made outside of an authorized 

channel� 

If we conclude that a product or serial number has been tampered with as identified by warranty seal or 

physical examination the warranty will be void� Additionally, excessive physical damage (beyond normal 

wear & tear) the warranty may be voided or pro-rated based on the extent of the damage as examined by 

an AVPro Edge representative�

Damage caused by “acts of God” are not covered� They can include natural disasters, power surges, storms, 

earthquakes, tornadoes, sink holes, typhoons, tidal waves, hurricanes, or any other uncontrollable event 

related to nature�

Damage caused by incorrect installation will not be covered� Incorrect power supply, inadequate cooling, 

improper cabling, inadequate protection, static discharge are examples of this�

Products installed or sold by a third party to AVPro Edge will be serviced by the Authorized AVPro Edge Re-

seller�

Accessories (IR Cables, RS-232, Power Supplies, etc…) are not included in the warranty� We will make ac-

ceptable effort to source and supply replacements for defective accessories at a discounted rate as needed.

OBTAINING AN RMA.

Dealers, Re-sellers, and Installers can request an RMA AVPro Edge Tech Support Rep or their Sales Engineer� 

Or you may email [email protected] or fill out the general contact form at www.avproedge.com

End users may not request and RMA directly from AVPro Edge and will be referred back to the Dealer, 

Re-seller or Installer�

SHIPPING.

For USA (not including Alaska and Hawaii)� Shipping is covered on advanced replacements for FedEx Ground 

(some expressed exceptions may apply)� Defective product return shipping is covered by AVPro Edge using 

an emailed return label� Item must be returned within 30 days of receipt of replacement product, after 30 

days, the customer will be billed� Other return shipping methods will not be covered�

For International (and Alaska and Hawaii) return shipping costs will be the responsibility of the returnee� 

Once the unit is scanned for return shipping AVPro Edge will ship new unit for replacement�  

LEGAL STUFF.

Limitation on Liability

Summary of Contents for AC-AXION-4























































Reviews:

No comments

Brands by name

Popular brands

Load more brands