AXIOMTEK EP820 Series, User Manual

Page: 58 / 80

EP820 All-In-One EPIC Board User’s Manual
Award BIOS Utility
52
z Super IO Device
Scroll to this item and press <Enter> to view the sub menu Super
IO Device.
¾ Onboard FDC Controller
Select Enabled, if your system has a floppy disk controller
(FDC) installed on the system board and you want to use it.
If you install and-in FDC or the system has no floppy drive,
select Disabled in this field. Options:
Enabled and Disabled .
¾ Onboard Serial Port 1/2
Select an address and corresponding interrupt for the serial
port. Options:
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ10, 2E8/IRQ11,
338/IRQ5, 238/IRQ7, Auto and Disabled .
¾ URAT Mode Select
When UART Mode Select is set as ASKIR or IrDA, the
options RxD, TxD Active and IR Transmittion delay will
appear.
¾ URAT 2 Mode
Use this item to select UART Mode.
¾ RxD, TxD Active