AXIOMTEK EP820 Series, User Manual

Page: 9 / 80

EP820 All-In-One EPIC Board User’s Manual
Introduction
3
„ Power is 5V (Optional) or 3.3V (Defaulted)
z Onboard Multi-I/O
„ One floppy (Optional) port supporting up to two devices
„ One SPP/EPP/ECP parallel port with 26-pin 2.0 pitch box-
header that supports LS-120
„ Two 16550 UART-compatible serial ports with +5V/+12V
power output in Pin 1 or Pin 9 via DIP jumper setting
‹
1 x RS-232
‹
1 x RS-232/422/485 and selectable via jumper setting and
auto flow control supported
„ DIO: 4bits input & 4bits output
z USB Interface
„ Four USB ports with fuse protection and complies with
USB Spec. Rev. 2.0
z Watchdog Timer
„ 255 levels as SMI and Reset from 0 ~ 255 seconds
controlled by W83627HF
z Bord Unique ID
„ Dallas DS2401 board unique ID supported for customized
application
z Hardware Monitoring
„ Integrate Winbond W83627HF Super I/O
„ Monitoring for CPU/System temperatures, System Voltage
and CPU Fan speeds
z Graphics/Streaming
„ VGA On-chip Intel
®
915GM
„ Supports up to 2048 x 1536 at 60 Hz resolution on non-
interlaced CRT monitors
„ Optional Dual LVDS LCD via Chrontel CH7308 converter
„ LCD backlight control supported
„ 18Bits or 36Bits LVDS LCD interface
z Ethernet
„ Duel Ethernet