AXIOMTEK EP820 Series, User Manual

Page: 59 / 80

EP820 All-In-One EPIC Board User’s Manual
Award BIOS Utility
53
When the IR transmission is enabled, you can set up speeds
of reception (RxD) and transmission (TxD).
¾ IR Transmission Delay
Enable or disable this item to decide if the IR transmission
delay function will be set or not while transferring to the
reception mode.
¾ UAR2 Duplex Mode
The second serial port offers these infrared interface modes:
1. IrDA
2.
ASKIR IrDA-compliant serial infrared port
3. Normalo (default value)
NOTE : The UART Mode Select will not appear on the menu
once you disable the setting of Onboard Serial Port
2.
¾ Use IR Pins
Use this item to set up IR devices based on the IR pin
definitions.
¾ Onboard Paralellel Port
This item allows you to determine the I/O address for
onboard parallel port. Options:
378/IRQ7, 278/IRQ5,
3BC/IRQ7 and Disabled .
¾
Parallel Port Mode
Select an operating mode for the onboard parallel (printer)
port. Select Normal unless your hardware and software
require another mode in this field.
¾ EPP Mode Select
Select EPP port type 1.7 or 1.9.
¾ ECP Mode Use DMA
Select a DMA channel for the parallel port while using the
ECP mode.
¾ PWRON After PWR-Fail
This item enables your computer to automatically restart or
return to its operating status.
Press <Esc> to return to the Integrated Peripherals page.
z Onboard Lan Boot ROM
Use this item to enable or disable the Boot ROM function of the
onboard LAN chip when the system boots up.